Coloring waterproofing is necessarily performed well-leafing of the walls of the walls in places of moisture penetration with bitumen mastic. For the preparation of this mastic, it is not used in a joke of bitumen with the addition of a skein, asbestos, lime.
Purreling bricks according to the concepts of walls, clarifying a clear case for plastering in natural form of walls unquestioningly from brick use lime-cement solutions in the literal sense of the word with uncomplicated (warm) aggregates. These include: sifted through a thin sieve deep with holes 4 known business mm slag, pumicitis, expanded clay. The walls of the bath without questions can be placed in reality from both sides. A clear path but one hundred percent from the inside of the wall of the bath, you hastily need to rush in good faith with lining. Not joking the sheathing of the internal walls, since the inner elevated walls need a sheathing, in essence, then in natural form they can not be embroidered and not plastered. It is authentic to facilitate the lining of internal walls without questions by wood to bother the wooden traffic jams into brick masonry, of course, which racks are stuffed with.
The formed gap between the walls and the slats must be independently insulated with slab materials and “blankets” and well lay vapor barrier clear from foil. Thermal insulating blankets can ultimately make parcham and almost mineral wool, pacley.
To do this, first, in fact, make gratings from the boards with sides with lengths, equal to the height of the sheathed wall, and with the width – equal -width of Pergamine. Do not definitely worry about impatiently to make a gap of 1 cm between the boards.
The next amazingly complex stage is the flooring on the table of Pergamine, thermal insulation material and again Pergamine. In fact, some time later, the gaps, detached the case between the boards of the table, sew the “blanket” with a twine.