Special types of grouts for pools, specialized types of floors and t. D. Grouts happen: simple and multi -purpose grouts for ordinary tiles and ordinary rules of use. Width of the seam – up to 6 mm. Special grouts for wide seams (from 4 to 16 mm) or distinguishing rules of use, in most cases.
Guarantees the progress and destruction of the seam in the absence of its destruction. When laying, ceramic tiles are usually used 2 doses:
VSTOK or with deformation seams, which are filled with a solution for grouting (fugue). The seams play a rather significant role: they give the planes the most aesthetic appearance, tiles are not covered with cracks and do not disappear at all, dimensional damage to the tiles are silent. The width of the seam is depending on the volume of the tile than the more tile, the wider the seam. Not very large tiles (15x 15 cm) are required to retreat with each other by 2-3 mm, and floor-made considerable tiles (35-40 cm)-up to 10-12 mm. Grouts can be tinted. The material for filling the seams is obliged to approach the colors to the tiles, although the final coloring of the fugues is installed subsequently the complete drying of the solution. . The flow consumption is depending on the volume of the tile and width of the seam (for example, for tiles of 20×20 cm and seam 2 mm is 300 g per 1 m2 of tile area). The solution for grouting the seams must be quite plastic and how to fill the seams between ceramic tiles, marble slabs, concrete tiles, stone tiles. The mixture can be used as inside, but also from the outside of houses, in dry and wet rooms.
When hardening, the seams become moisture resistant, and still resistant to high and low temperatures.